产品信息 - LX510570themoforming machine->Four in One Thermoforming & Coldforming packing machine.

添加会员

求助

Lxmachinery Co.,Ltd

回首页

公司简介

产品橱窗

影音视听

寄出询问函

联络我们

	Recommended Results

LX510570themoforming machine

产品分类 :

機械與設備->包裝機械->包裝機->四合一冷成型及熱成型包裝機

产品规格

Brand	LXplastic
Materials	process OPS PS PVC PET PVCsheet
Size	2700mm1650mm2000mm
Weight	2500kg
Color	Various
Packing	wooden case
Minimum Order	1 set
Payment Term	TT
Forming Area	760mm*540mm / 510mm x 570mm
Depth of Draw	100mm maximum
Material Thickness Range	0.15mm - 1.00 mm

产品描述

LX510570thermoforming machine
Production
: blisters and clamshell packages as well as trays, disposable containers for packaging of consumer products, appliances, electronics, construction, hardware, cosmetics, food, toys and automotive accessories from polymers BOPS PS PVC PET and HIPS.

DESIGN FEATURE
1. Programmable PLC and touch screen

2. Ability to store and recall all previous job settings and information of mold

3. Precise index accuracy utilizing Computerized AC servo drive system

4. Form and cut-in-place (triming) in one station

5.Electric preheater and Multi-zone contact heating system

6.Computerized AC servo drive sheet transport

7. High speed forming system and Pneumatic press operation

8.Ideally suited for roll-fed thermoplastic sheet including BOPS PS PVC PET and HIPS.

9.Allows automatically greasing of all major components

SPECIFICATION

1.SheetWidth:
650mm maximum

2.Power Consumption:
20 Kilowatts/hr (Approximate)

3.Air Pressure:
0.7Mpa

4.Air Consumption:
1200 Litres/min (42 CFM)

5.Cooling Water Consumption:
6 Litres/min @ 15° - 20° C (1.5 gal/min @ 58°-68° F)

DETAILS

1.Scrap rewind systemAn motor with speed control maintains a consistent web tension as scrap is rewound onto the scrap shaft.

2.Compact design :requires just one- third the floor space of a traditional machine

3.Programmable PLC: Operating programs can be stored in the PLC and automatically downloaded for fast setup.

4.High speed production:it is capable of operating up to 25 cycle per min Max. (dependant on material type , thickness,and mold ).

5.Servo: The operator sets the required length in inches and the computer will automatically program and display the selected index length on the screen.

6.Sequencing: The operator has visual access on the screen of all machine functions with the on/off time settings. Set-up and editing of these functions can be controlled by the touch screen during normal production operation.

7.Heater Temperature: The operator will select the heat desired in each zone. The controller sets and monitors the temperature and displays the set and actual temperature. The controller turns each zone on and off to maintain the set temperature. The temperature can be easily changed while the machine is operating under production conditions.

8.Tool Storage: Ability to store and recall all previous job settings and information including the following data:

1.Tool number
2.ndex length
3.Allsequencing data
4.Material type
5.Material thickness
6.Dwell time
7.Cycle speed
8.Heater settings

其他类似产品